Everyone loves mobile robot :) This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!

The kit comes in loose parts, so you will need to assemble it. What's so special about this mobile robot kit is it has Bluetooth module where you can control it with your smart phone and we have prepared the steps for you to control it using your smart phone apps. Of course your smart phone must have Bluetooth :) Every phone nowadays should have it.

Note: Compatible with Android smart phone with Bluetooth only, not compatible with iPhone.

With the beginner friendly Maker UNO as the controller, everyone can build and program this mobile robot. We have also included

• Dual channel motor driver
• Custom designed acrylic base
• Two "TT" brush motor
• 4 x AA battery to power the controller and motor
• Of course it comes with the Bluetooth module :)

To make life even easier, we have prepared

• Manual for you to connect the wires
• Sample code for Bluetooth control
• APK for Bluetooth app installation (Android only)
• Video to assemble the robot is in the making, stay tuned!

Features:

• Mobile Robot Kit
• Controller: Maker UNO
• Motor Driver: L298 dual channel DC brush motor driver
• Power both controller and motor with 4 x AA battery, with battery holder too.
• Comes with HC06 Bluetooth module, for wireless control from smart phone
• Open source example code, free to modify and learn coding
• Acrylic mobile robot base with many more space for prototyping
• Two "TT" motor with wheel, for differentiate drive
• Robust caster

Specification of the Mechanical Parts:

• Chassis size: ~215mm x ~150mm
• Wheel Diameter: 67mm
• Castor Height: 34mm
• Motor parameters:
  • Gear Ratio = 48:1
  • Speed with 66mm diameter wheel = 0.65 m/s at 7.2VDC
  • Recommended operating voltage: 5 - 10VDC
  • Noise level < 65dB
  • Current Consumption: 120 mA each motor (running at 6V)

Packing List:

• 1 x 2 wheel Smart Robot Car Chassis
• 1 x Maker UNO (Simplifying Arduino for Education)
• 1 x L298N Dual H Bridge Motor/Stepper Driver
• 1 x Male to Female Jumper Wire (Pack of 10)
• 1 x 40 ways Male to Male Jumper Wire
• 4 x 10mm PCB stand S/S
• 2 x 30mm PCB stand S/S
• 1 x GP 4 x AA Supercell battery
• 1 x Bluetooth transceiver module (HC-05)
• 1 x 4xAA battery holder
• 1 x USB Micro B cable
• 1 x Breadboard Mini (35mmx42mm), random color

Documents:

• Getting Started Guide - Schematic, Sample code(Google Presentation)
• Sample code - Arduino
• AT Mode for Bluetooth HC-05
• Bluetooth App APK for Android
• Assembly guide for the mechanical parts
• CH34X driver (Please ensure the Maker UNO is plug in to computer USB port during driver installation)
  • Windows (V3.5 Mar2019)
  • Mac OS (V1.5 Mar2019)
  • Linux (V1.5 Mar2019) (Normally is readily installed)
  • CH34X Driver - Get the latest driver from factory
• Arduino IDE download
• Maker UNO product page